The UK's market leading specialist distributor of insulation, dry lining and related products to the construction industry

Aquapanel Exterior Specialist Systems

Insulation Products: Dry Lining & Partitioning > Backer Boards, External Boards & Flooring Boards

Product Code: 73745

Product Literature

COSHH Data Sheet

Trade Enquiries

Find A Branch

DIY / Home Owners Enquiries

Buy Online

Product Description:

Aquapanel Exterior cement board technology sets new standards for the design and construction of buildings across Europe. Aquapanel Exterior Systems offer a high quality and economical alternative to traditional methods of construction, such as brick and block. It provides a solid, dry base that can withstand the extreme weathering effects of wind, rain and snow. It is an ideal substrate for Aquapanel Plaster. It can be used for exterior walls in ventilated systems or water managed (directly applied) systems.

Aquapanel Exterior: A cement board with a Portland cement and aggregate core, with coated glass fibre mesh embedded in the back and fromnt surfaces. Ends are square cut and edges are reinforced and finished smoothly.

Accessories

Exterior Joint Filler: A cement-based material for filling joists and embedding Aquapanel Exterior Joint Tapes and Mesh as part of the Aquapanel Exterior System. One bag will cover approximately 14m2.

Exterior Joint Tape: A 100mm wide, glass fibre tape with an alkali-resistant coating. It is embedded into Aquapanel Exterior Joint Filler to reinforce exterior joints as part of the Aquapanel Exterior System. Estimating Guide: 2.1m/m2

Exterior Reinforcing Tape: A 330mm wide-meshed glass fabric. OIt is embedded in Aquapanel Exterior Joint Filler to reinforce joints where a coat of paint is to be applied on top of the Aquapanel Exterior Base Coat, as part of the Aquapanel Exterior System. Estimating Guide: 2.1m/m2.

 

Exterior Reinforcing Tape: A 330mm wide-meshed glass fabric. It is embedded in Aquapanel Exterior Joint Filler to reinforce exterior joints, where a coat of paint is to be applied on top of the Aquapanel Exterior Basecoat, as part of the Aquapanel Exterior System. Estimating Guide: 2.1m/m2.

Exterior Reinforcing Mesh:  A 1m wide alkaline-resistant glass fabric mesh designed for complete cover reinforcement of Aquapanel Exterior Basecoat as part of the Aquapanel Exterior System. Estimating Guide: 1.1m2/m2.

 

Exterior Tyvek StuccoWrap: A special climatic membrane to be used as a water barrier from the outside to the inside and allows vapour diffusion from the inside to the outside. It is used in water managed (directly applied) systems, installed as a water-carrying layer directly behind the board as part of the Aquapanel Exterior System. Estimating Guide: 1.1m2/m2.

Exterior Primer: A  pre-mixed, white coloured, water-based emulsion for priming basecoated substrates where Aquapanel Exterior finishes are used as part of the Aquapanel Exterior System. Estimating Guide: One tub will cover approximately 100m2.

Exterior Basecoat - White:  A cement-based synthetic resin-enhanced material which serves as a complete basecoat as part of the Aquapanel Exterior System. The drying time is only 24 hours. It dries to a white colour with a smooth surface, ideal underneath light coloured finishes. Estimating Guide: One bag will cover approx 4m2 at a minimum thickness of 5mm.

Silicon Synthetic Resin Plaster:  A white, ready to use finishing plaster, with a maximum grain size of 2mm for applying on Aquapanel Exterior Basecoat and Aquapanel Exterior Primer. It is water-repellent and allows diffusuin with sd>0.1m. Estimating Guide: One tub will cover 8m2.

Dispersion Plaster:  A white, ready to use finishing plaster, with a maximum grain size of 2mm for applying on Aquapanel Exterior Basecoat and Aquapanel Exterior Primer. It is water-repellent and allows diffusion with sd>0.1m. Estimating Guide: One bag will cover approximately 10m2 at 2mm thickness.

Mineral Finish Plaster - White:  A decorative finishing plaster with 2mm garin size for application on top of Aquapanel Exterior Basecoat wither as a smooth floating finishing render or freely structured using different tools and designs. Estimating Guide: One bag will cover approximately 10m2 of 2mm thickness.

Click on the Sub Code for more details.

Sub Code
Length
Width
Thickness
Option
2400 mm
900 mm
12.5 mm
12.5mm x 900mm x 2400mm Exterior
-
-
-
Basecoat White 25kg
-
-
-
Silicon Synthetic Resin Plaster
-
-
-
Mineral Finish Plaster - White 30kg
50 mm
100 mm
-
50m x 100mm Exterior Joint Tape
50m mm
330mm mm
-
50m x 330mm Exterior Reinforcing Tape
-
-
-
Exterior Primer 15kg
50m mm
1m mm
-
50m x 1m Reinforcing Mesh

Other Products By This Manufacturer: Knauf Drywall

Manufacturers Website: www.knaufdrywallco.uk

Copyright 2013 SIG PLC | Privacy Policy | Terms & Conditions

Part of SIG Plc - www.sigplc.com