GTEC CH Stud
Light weight non-load bearing steel sections which are installed between GTEC Fire Core board and provide the bearing surface to which board is applied.
Material properties comply with BS 7364: 1990. Hot dipped galvanised steel to BS EN 10327: 2004. Designation DX51D + Z275 MBC. Cold rolled to BS 10162:2003.
Packs can be stacked in single packs, in a safe and stable manner on a flat surface. Sections supplied in bundles, small packs and strapped together in large packs for forklift truck off-loading, should be stacked in a safe and stable manner. Bands or straps should not be used for lifting. Coils/metal sections may spring apart when banding is released. Fixers must work from an independent support system as metal sections are not designed to support body weight.
CHS60/B, CHS90/B, CHS146/B
Unit of measure